NEW MINI LATHE HEAD STOCK WITH CHUCK

[heilcnc]

NEW MINI LATHE HEAD STOCK WITH CHUCK fits 7x10 7x12 mini lathe
It includes the spindle and all the pieces in the headstock casting, the High/Low shifter, all parts on the spindle, and all parts on the intermediate shaft, except the pulley new never used cost $119.00 from little machine shop 3 inch 3-Jaw self-centering lathe chuck includes a chuck key, inside and outside jaws,is on the headstock as shown that was $74.95 from little machine shop i got this to build a gang tool lathe but got layed off from work so it has to go the x y table for this project is in my other sales so look at my other ebay stuff


starting bid $140.00 no reserve $12.50 sh

http://cgi.ebay.com/ws/eBayISAPI.dll...fvi%3D1&_rdc=1