Hi all, my first postings to CNCzone after a couple of years of reading around and learning about cnc from your expertise. I've built a RepRap Huxley and am selling it so I can start my next build with a bigger build volume; the auction is here:
Complete, tested RepRap Huxley 3D Printer, heated build area & PLA filament. | eBay
many thanks for looking and all the best,
I made a machine for Rapid Prototyping, 3d Printer stereolithogrphy.
have a look at it..
please check working video of the machine.
http://www.youtube.com/watch?v=-Vu_agjDWKg]3D Printer, Stereolithography India - YouTube
Photographs of jewellary parts produced by machine:
Photographs of machine internal and external:
Specification of the machine:
Laser source: DPSS UV Laser 405nm
Scanning method: High Speed Galvo mirrors
Working area (x, y, z): 110 x 110 x 200 mm
Slice thickness*: 0.01 – 0.10 mm
Laser scanning speed: 0-4400 mm/sec
Software : Proprietry
OS: Windows 7, WinXP, Linux support in near future
Input file format:
.stl - .slc, .mkr(DWSSystems format), gcode
Machine size: 380 x 515 x 733 mm
Weight: 50 Kg
Temperature Range: 22-25°C
Humidity Range: 60%
Electrical consumption: 400 W
Power supply: AC 230/115 V / 50-60 Hz
if any question ask me on email@example.com or firstname.lastname@example.org
NOTE: i dont find a link to start new thread so i posted it here. Sorry if i divert the discussion..