E-Z Lift of Tomes Industries, Inc.

[bryanm]

E-Z Lift by Tomes Industries, Inc.

Looking for customers and distributors to use this new product offered by Tomes Industries, Inc.

The E-Z Lift is a new device which will improve your LEAN Manufacturing techniques by lifting your products, component parts, chocolate chips, roll pins, screws, etc., from ground level to bin holding height, while improving employee efficiency and utilization. E-Z Lift also reduces back injuries and worker's comp claims while taking up very little floor space.

Standard Features:
Small 20"x18" footprint, fits anywhere in your plant
Customization of height and movement available
Easy snap-on bucket receiver to accept your container
E-Z unloading mechanism to remove your container
Hookup anywhere 110 Volt AC
Lifting capacity of 200lbs
Lift and dump capacity of 75lbs.

Watch a video of the E-Z Lift at our website.
Interested in pricing and more information about the E-Z Lift contact
Bryan Molt, Tomes Industries, Inc., 1-800-375-3443 or e-mail bryanm@tomesindustries.com

[Armando6887]

Thanks for the tips guys.... Lathe is a G2949 and looks like the controls are 24v. Here's the machine so far. I got the mechanicals done, but am a bit chicken on the electrical. I'm sure I make it harder than it has to be. I have a kill sw, and really just need a new forward/reverse switch arrangement.