- 2014 HAAS VF2SS VMC
-
Registered
2014 HAAS VF2SS VMC
Hey All!
I have a 2014 Haas VF2SS in really goods condition. One owner machine with really low cutting hours. 4195. 12000 RPM. 24 tool high speed side mount tool changer, 1400 IPM, expanded memory and many more features. On our floor now, fully powered and tested.
2014 Haas VF2SS
If you have any questions regarding this machine, please contact us at (909) 919-9600 or sales@machinestation.us
MachineStation | 4590 Eucalyptus Ave. Chino, CA 91710
Make: Haas
Model No.: VF-2SS
Serial No.: 1112279
Year of Manufacture: 04/2014
Condition: Excellent
All specifications are approximations, and are subject to verification.
-------------------------------------------------------
Equipped With:
12,000 RPM Direct Drive Spindle
1400 Inch Per Min. Rapid
Rigid Tapping
USB Drive
User Definable Macros, Spindle Orientation and Coordinate Rotational Scaling
Brushless servo drive motors on all axis
24 + 1 automatic high speed tool changer
Programmable coolant
Telescopic way covers
Chip auger
Flood Coolant system
Tooling Shelves
Tool Clamping Vise
Levelling Pads
Original Manuals
In Built 480V Transformer
------------------------------------------------
Specifications:
Travels:
X-Axis: 30"
Y-Axis: 16"
Z-Axis: 20"
Rapid Traverse Rates: 1400 Inch Per Minute
Cutting Feed Rates: 833 Inch Per Minute
Spindle Nose to Table (Min.- Max.): 4" - 24"
Table:
Length: 36"
Width: 14"
Number of Std T-Slots: 3
Max Weight on Table: 1500 lbs
Spindle:
Taper Size: CAT 40
Speed Range: 0 - 12,000 RPM
Spindle Power: 30 HP
Max Torque: 90ft-lb @ 2000RPM
Automatic Tool Changer:
Capacity: 24 + 1
Max Tool Weight: 12 lbs
Max Tool Dia: 5"
Max Tool Length: 11"
Tool-to-Tool (avg.): 1.6 seconds
Chip to Chip (avg.): 2.2 seconds
General:
Air Required: 100 psi, 4 scfm
Power: 220v / 66FLA / 3-Phase
Overall Dimensions: 89″ x 92″ x 104″ High
Weight: 9200 lbs
Similar Threads:
-
- 2014 HAAS VF2SS VMC
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules