2014 HAAS VF2SS VMC

[MachineStation]

Hey All!
I have a 2014 Haas VF2SS in really goods condition. One owner machine with really low cutting hours. 4195. 12000 RPM. 24 tool high speed side mount tool changer, 1400 IPM, expanded memory and many more features. On our floor now, fully powered and tested.

2014 Haas VF2SS

If you have any questions regarding this machine, please contact us at (909) 919-9600 or sales@machinestation.us

MachineStation | 4590 Eucalyptus Ave. Chino, CA 91710

---

Make: Haas
Model No.: VF-2SS
Serial No.: 1112279
Year of Manufacture: 04/2014
Condition: Excellent
All specifications are approximations, and are subject to verification.
-------------------------------------------------------

Equipped With:
12,000 RPM Direct Drive Spindle
1400 Inch Per Min. Rapid
Rigid Tapping
USB Drive
User Definable Macros, Spindle Orientation and Coordinate Rotational Scaling
Brushless servo drive motors on all axis
24 + 1 automatic high speed tool changer
Programmable coolant
Telescopic way covers
Chip auger
Flood Coolant system
Tooling Shelves
Tool Clamping Vise
Levelling Pads
Original Manuals
In Built 480V Transformer

------------------------------------------------

Specifications:
Travels:
X-Axis: 30"
Y-Axis: 16"
Z-Axis: 20"
Rapid Traverse Rates: 1400 Inch Per Minute
Cutting Feed Rates: 833 Inch Per Minute
Spindle Nose to Table (Min.- Max.): 4" - 24"


Table:
Length: 36"
Width: 14"
Number of Std T-Slots: 3

T-Slot Width: 5/8"

Max Weight on Table: 1500 lbs


Spindle:
Taper Size: CAT 40
Speed Range: 0 - 12,000 RPM
Spindle Power: 30 HP
Max Torque: 90ft-lb @ 2000RPM


Automatic Tool Changer:
Capacity: 24 + 1
Max Tool Weight: 12 lbs
Max Tool Dia: 5"
Max Tool Length: 11"
Tool-to-Tool (avg.): 1.6 seconds

Chip to Chip (avg.): 2.2 seconds

General:
Air Required: 100 psi, 4 scfm
Power: 220v / 66FLA / 3-Phase
Overall Dimensions: 89″ x 92″ x 104″ High
Weight: 9200 lbs



Similar Threads:

• Machine definition/Post processor for HAAS VF2ss
• Problem- HAAS VF2 2014 ALARMS OUT WHEN TRYING TO RUN FROM USB THUMBDRIVE
• Need Help!- 96 Haas VF2SS with SMTC Tool change problems
• Haas VF2SS or VF2TR?
• 2014 Haas VM-6 Z axis repeatability not what it should be?