WATER CHILLER CW5000 COOLING FOR LASER ENGRAVER/CUTTER


Results 1 to 2 of 2

Thread: WATER CHILLER CW5000 COOLING FOR LASER ENGRAVER/CUTTER

  1. #1
    Registered lasertube's Avatar
    Join Date
    Nov 2013
    Location
    Montreal
    Posts
    164
    Downloads
    0
    Uploads
    0
    Items for Sale

    Default WATER CHILLER CW5000 COOLING FOR LASER ENGRAVER/CUTTER

    CW-5000 Water Chiller(AC110V or 220V)

    this unit controls the temperature of the laser tube cooling water and prevents laser operation
    if water flow fails or chiller is left off.
    Compact design with ±0.3'C temperature accuracy
    Compressor delay circuit, over-current protection
    Over-heat temperature alert, water flow protection
    CE certified
    Specification
    Cooling Power: 692W
    BTU: 2361 BTU / h
    Input power: AC 220V, 50Hz
    Current; 2.1A
    Compressor power: 3/8HP, 305Watt
    Freon: R134a
    Pump power: 30W
    Lift (cut off) : 10m (33ft)
    Rate: 10L/min, 158GPH
    Ambient Temp.: ≤ 35 ' c
    Chilled Water Temp. 8~30'C
    Dimension:550×280×430mm

    WATER CHILLER CW5000 COOLING FOR LASER ENGRAVER/CUTTER | eBay

    Similar Threads:


  2. #2
    Registered
    Join Date
    Oct 2013
    Location
    Montreal
    Posts
    50
    Downloads
    0
    Uploads
    0

    Default Re: WATER CHILLER CW5000 COOLING FOR LASER ENGRAVER/CUTTER

    up up up



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

WATER CHILLER CW5000 COOLING FOR LASER ENGRAVER/CUTTER
WATER CHILLER CW5000 COOLING FOR LASER ENGRAVER/CUTTER