Haas Mini Mill VMC
Video
CALL 909-919-9600 or email sales@machinestation.us for more information
This One Owner Machine has only 3920 Spindle Hours. All Original Paint Machine, 4th Axis Ready.
On our Floor now, fully powered / tested & is in Great working condition. check *VIDEO*”
Make: Haas
Model No.: Mini Mill
Serial No.: 24004
Year of Manufacture: 2001
Condition: Very Good
HAAS MINI MILL VMC 4th AXIS READY Features:
Spindle Time 3920 Hours
4th Axis Ready ( drives and wiring installed )
1 MB Program Memory
Rigid Tapping
Advanced Tool Management
Power Failure Detection Module
User Definable Macros, Spindle Orientation and Coordinate Rotational Scaling
10 Station automatic tool changer
Programmable coolant
Telescopic way covers
Floppy Drive
Coolant system
————————————————
HAAS MINI MILL VMC 4th AXIS READY Specifications:
Travels:
X-Axis: 16″
Y-Axis: 12″
Z-Axis: 10″
Rapid Traverse Rates: 600 Inch Per Minute
Cutting Feed Rates: 500 Inch Per Minute
Spindle Nose to Table (Min.- Max.): 4″ – 14″
Table:
Length: 36″
Width: 12″
Number of Std T-Slots: 3
T-Slot Width: 5/8″
Max Weight on Table: 500 lbs
Spindle:
Taper Size: CAT 40
Speed Range: 0 – 6000 RPM
Spindle Power: 7.5 HP Vector Dual Drive
Automatic Tool Changer:
Capacity: 10
Max Tool Weight: 12 lbs
Max Tool Dia: 3.5″
Tool Changing Time: 3.6 Seconds
General:
Air Required: 100 psi, 4 scfm
Power: 220v / 66FLA / 3-Phase
Overall Dimensions: 84″ x 74″ x 100″ High
Weight: 3400 lbs
Similar Threads:
Last edited by MachineStation; 03-08-2017 at 01:18 PM.