Hi Todd,
The Kanalog ADC's can tolerate 12V. They are not isolated.
Consider adding a Konnect for 32 more opto Isolated Inputs.
Regards
I am short on Kanalog opto inputs. Can I use the 0-10 analog inputs with 12 volts? These will be reading an on/off signal from 12 volt proximity switches.
Thanks,
Todd
Similar Threads:
Hi Todd,
The Kanalog ADC's can tolerate 12V. They are not isolated.
Consider adding a Konnect for 32 more opto Isolated Inputs.
Regards
Regards
TK http://dynomotion.com