Snapamp set up


Results 1 to 3 of 3

Thread: Snapamp set up

  1. #1
    Registered
    Join Date
    May 2013
    Location
    Usa
    Posts
    218
    Downloads
    0
    Uploads
    0

    Default Snapamp set up

    I am setting up a snapamp , and have noticed that the one I have has changed since the on line manual was posted.

    the ground cable on the snap amp goes to chassis or kflop?

    do I use a jumper on jp5 if I am using only 1 board , manual only mentions 2 board layout , also what does the jumper do ?

    Does snapamp get 5 volts to run from kflop jp4 to jp6 connection?

    I have checked out the manual on line and the wiki , is there another source for info ?

    Similar Threads:


  2. #2
    Gold Member TomKerekes's Avatar
    Join Date
    May 2006
    Location
    USA
    Posts
    2497
    Downloads
    0
    Uploads
    0

    Default Re: Snapamp set up

    Hi Gregore,

    Regarding:

    the ground cable on the snap amp goes to chassis or kflop?
    KFLOP

    do I use a jumper on jp5 if I am using only 1 board , manual only mentions 2 board layout , also what does the jumper do ?
    Manual states:

    JP5 Jumper installed configures a SnapAmp as the 2nd SnapAmp.

    So do not install Jumper JP5 on the first or only SnapAmp.

    Does snapamp get 5 volts to run from kflop jp4 to jp6 connection?
    Yes. As the manual states: JP6 is for Communication and Logic power.

    I have checked out the manual on line and the wiki , is there another source for info ?
    There are also Forum and Yahoo Group Posts.

    Regards

    TK
    http://dynomotion.com


  3. #3
    Registered
    Join Date
    May 2013
    Location
    Usa
    Posts
    218
    Downloads
    0
    Uploads
    0

    Default Re: Snapamp set up

    Thanks ,

    very slowly this is starting to make some sense ....... there is soooo much to learn when you are coming from just blindly running a CNC machine with no clue as to anything that goes on behind the curtain .



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Snapamp set up
Snapamp set up