Hi Gregore,
Regarding:
KFLOPthe ground cable on the snap amp goes to chassis or kflop?
Manual states:do I use a jumper on jp5 if I am using only 1 board , manual only mentions 2 board layout , also what does the jumper do ?
JP5 Jumper installed configures a SnapAmp as the 2nd SnapAmp.
So do not install Jumper JP5 on the first or only SnapAmp.
Yes. As the manual states: JP6 is for Communication and Logic power.Does snapamp get 5 volts to run from kflop jp4 to jp6 connection?
There are also Forum and Yahoo Group Posts.I have checked out the manual on line and the wiki , is there another source for info ?
Regards