New Machine Build Wire Processing Robot - by True Machine Design - using GoldCNC5 running on KFlop.


Results 1 to 2 of 2

Thread: Wire Processing Robot - by True Machine Design - using GoldCNC5 running on KFlop.

  1. #1
    Registered jeffserv's Avatar
    Join Date
    Jul 2004
    Posts
    218
    Downloads
    0
    Uploads
    0

    Default Wire Processing Robot - by True Machine Design - using GoldCNC5 running on KFlop.

    Hi All,

    Over the winter, I built this Wire Processing Robot; to make wires for the UL508a panels we build at True Machine Automation. May turn 4 days of wire making into approx. two days.

    This is our GoldCNC5 running on the KFlop Motion Board, One Konnect Board; running KMotion ver. 4.33.

    All this machine, is run using 1 GCode program and MCodes for running "C" programs and Inputs and Outputs.

    This machine has X, Y, Z, A (Rotate Effector), C (Wire Feed). Some new parts, mostly surplus from previous jobs.

    So far KFlop and KMotion has done everything I wanted it to... really like the system.

    - Jeff Redington



    Video

    Similar Threads:
    GOLDCNC5, BLUECNC4, GreenCNC3, RedCNC2L, SilverCNC2; CNC Software!
    www.truemachinedesign.com - - - - - - - - - www.truemachineautomation.com


  2. #2
    Gold Member TomKerekes's Avatar
    Join Date
    May 2006
    Location
    USA
    Posts
    2490
    Downloads
    0
    Uploads
    0

    Default Re: Wire Processing Robot - by True Machine Design - using GoldCNC5 running on KFlop.

    That is downright cool. Amazing the number of tasks you were able to perform with the single 4 axis robot.

    TK
    http://dynomotion.com


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Wire Processing Robot - by True Machine Design - using GoldCNC5 running on KFlop.
Wire Processing Robot - by True Machine Design - using GoldCNC5 running on KFlop.