That is downright cool. Amazing the number of tasks you were able to perform with the single 4 axis robot.
Hi All,
Over the winter, I built this Wire Processing Robot; to make wires for the UL508a panels we build at True Machine Automation. May turn 4 days of wire making into approx. two days.
This is our GoldCNC5 running on the KFlop Motion Board, One Konnect Board; running KMotion ver. 4.33.
All this machine, is run using 1 GCode program and MCodes for running "C" programs and Inputs and Outputs.
This machine has X, Y, Z, A (Rotate Effector), C (Wire Feed). Some new parts, mostly surplus from previous jobs.
So far KFlop and KMotion has done everything I wanted it to... really like the system.
- Jeff Redington
Video
Similar Threads:
GOLDCNC5, BLUECNC4, GreenCNC3, RedCNC2L, SilverCNC2; CNC Software!
www.truemachineautomation.com - ETL UL508A CSA CERTIFIED INDUSTRIAL CONTROL PANEL SHOP
That is downright cool. Amazing the number of tasks you were able to perform with the single 4 axis robot.
Regards
TK http://dynomotion.com