Your spindle no matter what channel it's hooked to should not be included when you define the coordinate system. Therefore it should not effect the readouts.
Ben
Sent from my HTC6525LVW using Tapatalk
Just started to rewire my Novakon mill to KFlop. I have servo spindle with step/dir and I assigned axis channel #3 to control it.
In KMotionCNC channel #3 is linked to "A" axis, so when spindle is running A axis DRO is running too.
Question - is it possible to link the channel to a different axis, like to "B" or "C"?
Thanks!
Similar Threads:
Your spindle no matter what channel it's hooked to should not be included when you define the coordinate system. Therefore it should not effect the readouts.
Ben
Sent from my HTC6525LVW using Tapatalk