Tom I wanted you to see that your screen editor is not going to waste. The screen is 1920x1080. I will probably have a few questions about how to modify one of the mpg programs whichever is best. I would like to implement the mpg on my screen to enable/select axis/step size using virtual bits but hookup a hardware encoder for jogging. Also how to get some buttons to behave the way I would expect. Last is there a way to change the background image for kmcnc?
Ok I have finally gotten a chance to use the screen I made. It works great but I have found a few issues. The cycle start and feedhold button images I created are not persistent. After starting the first cycle they revert to the original images that come with the program. It's worth noting I could not get the dotnet to load on the pc I'm running on so the screen was made on another pc. Any ideas on how to get things right would be great.
What Version are you running? I thought that issue was resolved in Version 4.34g with a new Button Type "DualButton". For the Cycle Start and FeedHold Buttons where KMotionCNC changes the image based on the machine state (rather than "pushed" state). See:
Thanks for getting back so soon. I am using 433h. I will change the screen button type to dual buttons for those 2 and let you know how it goes. As for the background I was going to make a full screen underlay that give a 3d effect to each area so everything would be bracketed so to speak. The pictures I took really don't give the full effect but all my buttons are 3d so the screen has some depth. I made 2 images or more for every button on the screen so each one has a pressed state. If your interested in the screen or buttons let me know and I'll figure out how to send them on. There's 11mb worth of images. Over 200 total. If you need any special buttons made I can add them to the libraries pretty easy now that I have come up with a good system for creating them.
I tried the dualbutton setting but still no dice. If you press either button they revert back until kmotion is restarted. Is there somewhere I can find the images used in kmotion and copy my own over top using the same name and format?
I believe it's most likely the crazy way I installed the program on the Windows 7 pc that is at issue. I have decided to install Windows 8 since I have a new unused copy that's been laying around for years. That will allow me to have the screen editor on the machine pc. Hopefully this will fix my issues.
I have 2 different pc's with Windows 7 64 bit that I can't get to install the .net and other software that comes with kmotion for any reason. I tried everything I saw people mention trying in the Yahoo forum and I couldn't get any of that to work either. The pc's even refuse to read the signed drivers as well. I finally got kmotion loaded by turning off driver signature enforcement. But that's all it would load. As you can tell it's been driving me crazy.