New screen - Page 2


Page 2 of 2 FirstFirst 12
Results 13 to 18 of 18

Thread: New screen

  1. #13
    Gold Member TomKerekes's Avatar
    Join Date
    May 2006
    Location
    USA
    Posts
    2209
    Downloads
    0
    Uploads
    0

    Default Re: New screen

    Hi Ben,

    Please post your GCode, Init C File, and KMotionCNC Tool Setup settings for us to look at and see if we can duplicate the problem.

    Also what do you mean by "warm up routine"?

    Regards

    TK
    http://dynomotion.com


  2. #14
    Registered
    Join Date
    Jun 2013
    Location
    USA
    Posts
    924
    Downloads
    0
    Uploads
    0

    Default Re: New screen

    It will be tomorrow afternoon before I can get those files for you. The warm-up program moves through the entire travel in xyz back and forth while the spindle runs at slow speed. It moves through the travels 21 times at 200ipm.

    Thank you
    Ben

    Sent from my HTC6525LVW using Tapatalk



  3. #15
    Registered
    Join Date
    Jun 2013
    Location
    USA
    Posts
    924
    Downloads
    0
    Uploads
    0

    Default Re: New screen

    I tried to move the files to my phone and that works fine. I could not figure out how to attach them in tapatalk. In the mean time I have kept doing my own tests and things are running well again. Somehow my trajectory planner settings in kmotion cnc had changed. Everything else was right. The only things on that screen that were different was the top trajectory planner tab and the accel under axis parameters. I changed these to what they were before I started building my screen and things are good. The fault always happened at a quadrant. My guess is that the higher acceleration caused the motor to go unstable while trying to apply backlash comp at the quadrant. The only lingering question I have is what caused the dro to change to -nan(ind)? Also is there any update on when we might see a way to change the kmotioncnc background image.

    Thank you
    Ben

    Sent from my HTC6525LVW using Tapatalk



  4. #16
    Gold Member TomKerekes's Avatar
    Join Date
    May 2006
    Location
    USA
    Posts
    2209
    Downloads
    0
    Uploads
    0

    Default Re: New screen

    Hi Ben,

    Thanks for the update. DRO's showing -nan(ind) basically means a divide by zero or similar occurred somehow. Not sure why but incorrect setting could possibly be the reason.

    Sorry for the delay on the KMotionCNC background image. We are trying to roll that in with some other features that would allow font/text changes on some of the other button types such as checkboxes and radio buttons. But having trouble so it may be a while.

    Regards

    TK
    http://dynomotion.com


  5. #17
    Registered
    Join Date
    Jun 2013
    Location
    USA
    Posts
    924
    Downloads
    0
    Uploads
    0

    Default Re: New screen

    Ok my issues have returned. The k-flop is disconnecting pretty regularly. I will figure out how to get the files you asked for before sometime this week. The console does not really give me a good idea what's going on. When it disconnects I always get the tau message. Do you have any idea what that might mean?New screen-uploadfromtaptalk1490632517810-jpg

    Sent from my HTC6525LVW using Tapatalk



  6. #18
    Gold Member TomKerekes's Avatar
    Join Date
    May 2006
    Location
    USA
    Posts
    2209
    Downloads
    0
    Uploads
    0

    Default Re: New screen

    Hi Ben,

    The Tau printout is probably being printed by your Init C Program. It indicates that you have a small amount of Coordinated Motion Smoothing being applied. That isn't any indication of an error.

    Regards

    TK
    http://dynomotion.com


Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

New screen
New screen