Need Help! DRO on Mach3


Results 1 to 3 of 3

Thread: DRO on Mach3

  1. #1
    Registered
    Join Date
    Nov 2009
    Location
    ITALY
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default DRO on Mach3

    Hi Tom
    this is my problem:
    actually in the axis DRO I read the commanded position called by Mach3 for each axis, is there a way for display the real position handled by Kflop?

    thanks

    Beppe

    Similar Threads:


  2. #2
    Gold Member TomKerekes's Avatar
    Join Date
    May 2006
    Location
    USA
    Posts
    2215
    Downloads
    0
    Uploads
    0

    Default Re: DRO on Mach3

    Hi Beppe,

    Mach3 has separate DROs to display encoder positions. In the standard screen set they are on the Offsets Screen.

    DRO on Mach3-encodersmach3-jpg

    Regards

    TK
    http://dynomotion.com


  3. #3
    Registered
    Join Date
    Nov 2009
    Location
    ITALY
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Re: DRO on Mach3

    thanks Tom

    Beppe



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

DRO on Mach3
DRO on Mach3