Kmotion computer minimum specs


Results 1 to 2 of 2

Thread: Kmotion computer minimum specs

  1. #1
    Member
    Join Date
    May 2016
    Posts
    35
    Downloads
    0
    Uploads
    0

    Default Kmotion computer minimum specs

    Hi everyone,

    I bought a Kflop/Kanalog setup that I have been learning how to use with my main computer, but I will need a second computer to live with the machine once it's done. I looked through the documentation for minimum specs the PC should have to reliably run Kmotion/KmotionCNC but didn't find any, I get that because the Kflop is handling the realtime stuff the computer doesn't need to be very fast but I want to make sure I don't end up with an old used one causing problems feeding the g-code to the Kflop in time for execution. I am planning to do any cad/cam work on the main computer so this would only be used for Kmotion.

    Thanks,
    Andy

    Similar Threads:


  2. #2
    Member TomKerekes's Avatar
    Join Date
    May 2006
    Location
    USA
    Posts
    4043
    Downloads
    0
    Uploads
    0

    Default Re: Kmotion computer minimum specs

    Hi Andy,

    Any computer that runs Windows reasonably well should be fine.

    HTH
    Regards

    Regards
    TK http://dynomotion.com


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Kmotion computer minimum specs

Kmotion computer minimum specs