See here for a previous post
Regards
Im no electronics guru, but it seems to me like this would be a huge problem. Despite this I cant find anyone who's done it. I have several of the magnetic slider DROs that are popular on ebay. Id the Klop or Kanalog capable of utilizing these as positioning devices for servos? If so, then put me down for 2 of each...
Here's an example of the DROs' im talking about. They plug into the display via a mini USB.
http://www.ebay.com/itm/35-Digital-R...item20bea5571e
Thank ya much!
Similar Threads:
- Idea - DIY Linear Magnetic Encoder
- HOW TO CHANGE ACTIVE ENCODER FROM LINEAR SCALE TO MOTOR ENCODER IN SIEMENS 840D.
- Need Help!- Error 1170...MCS magnetic encoder alaram OSP E100L Macturn
- Need Help!- Magnetic Linear Encoder Reading Head - with 5 Micron
- Any one have experiance with linear magnetic encoders?
Last edited by SwampDonkey; 03-23-2013 at 08:36 AM.
See here for a previous post
Regards
Regards
TK http://dynomotion.com
Those are fine for manual positioning but they don't update near fast enough for CNC use.
bob