Hi Edwardo, I can't offer much help on these setting as I have not "explored" them on my machine. I do know if you open the help section in the dynatorch cutting screen there is some information on these settings. I noticed in the video you posted that you have the dual motor drive, drop side table. I have the single side motor drive standard table. I just ordered a dual motor drive drop side "conversion" for my 5 x 10 table. I purchased my gantry about 3 years ago. Until recently I was not aware of all the improvments that had been made to the Dynatorch machines. With the conversion comes an upgraded 24 pitch gear rack. I am also adding the Dash unit and when the money comes in (it seems to be on a slow boat from China right now) I will add the scibe unit. I like the fact that when ever Dynatorch upgrades their machine they make sure that it can be retrofit to the older versions. Let us know what you find out on the settings.