Newbie Dynatorch XLS 5' x 10'


Results 1 to 2 of 2

Thread: Dynatorch XLS 5' x 10'

  1. #1
    Registered
    Join Date
    Apr 2017
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Question Dynatorch XLS 5' x 10'

    Hey Ya'll,

    This is my first post as a member of CNCZone.
    I am a beginner when it comes to CNC Plasma.
    I have never known anyone with a CNC Plasma.
    I have never used or seen a CNC Plasma being used (besides YouTube).

    I recently began doing research on CNC Plasma Tables and considered building a basic DIY table. While I was researching, and seeing what it would take to build or buy a used setup, I came across a screaming deal on a 5'x'10' Dynatorch XLS table and Victor Cutmaster A60 (cheaper than I could have built my own). I snapped it up as quick as I could and assembled as much as I could; it needs two fiberoptic comm cables. So now, I have this kick ass machine sitting in my shop and I haven't the faintest of ideas on how to use it properly.

    I am very excited to get this up and running but I really don't know where to start. What is the best way to start designing? Can I convert a vector image (Adobe Illustrator) into a cut-able image?

    I have time for my cables to come in so I plan on doing lots of research.

    - Kolt









    Similar Threads:


  2. #2
    Monkeywrench Technician DareBee's Avatar
    Join Date
    Jan 2004
    Location
    Stratford, Ont. Canada
    Posts
    3154
    Downloads
    0
    Uploads
    0

    Default Re: Dynatorch XLS 5' x 10'

    You will need your vector files to be in DXF format then you can use the Dynatorch software to convert it into Gcode.
    Speeds, feeds and cut data should be available from the plasma manufacturer (my Hypertherm has extensive cut setup charts available)

    www.integratedmechanical.ca


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Dynatorch XLS 5' x 10'

Dynatorch XLS 5' x 10'