To modify or buy new?


Results 1 to 3 of 3

Thread: To modify or buy new?

  1. #1
    Registered
    Join Date
    Jul 2007
    Location
    usa
    Posts
    54
    Downloads
    0
    Uploads
    0

    Default To modify or buy new?

    Hey all..

    I have a 2007 Dynatorch 5'x10' table and I'm looking to upgrade.

    I have a price from Dynatorch to upgrade with a few added goodies for about 10 k. My machine now has 3 servos so I'd be upgrading to the 4 and eliminating the jack shaft.

    If I buy new I'd be buying a 6'x12' machine but that machine is close to 27k with a few added features.

    My machine doesnt have a bunch of time on it but I'm guessing I could sell it for around 12,000.
    I have we-cim and cutting shop.
    Fairly certain I'll be staying with Dynatorch since I've had nothing but positive customer service from them.

    Thoughts suggestions??


    Thanks
    Chris

    Similar Threads:


  2. #2
    Registered
    Join Date
    Feb 2018
    Location
    United States
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: To modify or buy new?

    I know this is an old post but what did you decide to do? I'm kinda in the same situation with the same machine any advice would be appreciated.



  3. #3
    Registered totalfab06's Avatar
    Join Date
    Feb 2007
    Location
    USA
    Posts
    22
    Downloads
    0
    Uploads
    0

    Default Re: To modify or buy new?

    Did you get any advice?? I currently in the same boat..



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

To modify or buy new?

To modify or buy new?