Dynapath Delta 20 Troubles

[red zilla]

I had the power supply go bad on my prototrak plus the main cause is forgeting to turn it off leaving it on all night, mine didn't have a fan in it to keep it cool, they allso asked $1000.00 to fix it, I got the numbers off the board and got on the web, within a few minuts found the same board for $120.00 need less to say they know what makes them go bad but there not telling because they make a fourtune replacing power supplys, I used to work on pinball machines a few years back and that"s mostly what went out on them.
But as for the daynapath 10 I don't know much about but I will shortly just purchased a tree journeyman 325 yesterday with the dynapath 10 controls, I'm going to get it here in just a few min. mabey you guys can share a little programing information looks todaly different than the prototrak plus.

[red zilla]

Has any one used one of these power supplys in there delta 20? the price is right thats for sure and the voltage is to, you have to look under spec page on this link to get the proper volts.QP-320F - MEAN WELL POWER SUPPLY QUAD, 5/12/24/-12VCD @ 20/10/5/2A, 320W, W/ PFC FUNCTION