issues with cutter comp on delta 20

[dingo0722]

Not sure why this gives me a 133 format fault alarm on N27

any thoughts?

N1G00
N2G90
N3G80
N4G70
N5G40
N6M03S3000T01

N7E01X2.1045Y-2.0421
N8M07
N9Z.1
N10G01Z-.75F10.
N11G17G03X2.0205Y-2.0421I2.0625J-2.0421F12.
N12G03X2.1045Y-2.0421I2.0625J-2.0421
N13G01X2.3385
N14G03X1.7865Y-2.0421I2.0625J-2.0421
N15G03X2.3385Y-2.0421I2.0625J-2.0421
N16G00Z.1

N17E01X6.7295Y-2.9579
N18G01Z-.75F10.
N19G03X6.6455Y-2.9579I6.6875J-2.9579F12.
N20G03X6.7295Y-2.9579I6.6875J-2.9579
N21G01X6.9635
N22G03X6.4115Y-2.9579I6.6875J-2.9579
N23G03X6.9635Y-2.9579I6.6875J-2.9579
N24G00Z.1

N25E01X2.2075Y-2.0421
N26G01Z-.75F10.
N27G41D01X2.5825F12.
N28G03X1.5425Y-2.0421I2.0625J-2.0421
N29G03X2.5825Y-2.0421I2.0625J-2.0421
N30G40G01X2.2075
N31G00Z.1

N32E01X6.8325Y-2.9579
N33G01Z-.75F10.
N34G41D01X7.2075F12.
N35G03X6.1675Y-2.9579I6.6875J-2.9579
N36G03X7.2075Y-2.9579I6.6875J-2.9579
N37G40G01X6.8325
N38G00Z.1
N39M09
N40G90
N41G80
N42M30

[T0DD]

Delete the D01. Dynapath doesn't use this callout.
Todd

[paynebros]

I need the same format for mine to use cut comp. When I use Feature cams x-build it keeps outputting a

N40G01G40X BLAH BLAH
I cant seem to get it to separate the G commands Subsequent lines will be separate as G is modal, but the first in a series will be joined.