Dyna Delta20 Peck Drill Program

[dingo0722]

I am looking for a copy of a Delta 20 peck drill program so I can modify my cam post processor so I can use the feature. I have no idea how to program this conversationally on the machine so I was hoping someone might have something simple they could cut and paste into the forum

[T0DD]

If you are looking for ISO format, see below. If you are looking for conversational, I've never used it. I do know that both formats can be used it the same program.

(0001)
N1T1M06
N2S900M03
N3G00X1.1345Y.655
N4Z.1
N5G83X1.1345Y.655R.1K.05Z-.25F2.
N6X1.1345Y-.655
N7X0.0Y-1.31
N8X-1.1345Y-.655
N9X-1.1345Y.655
N10X0.0Y1.31
N11X.364Y.9854
N12G80
N13G00Z1.
N14M30
E

If this doesn't help I'll look at the manual for the conversatioal command.

[dingo0722]

this is great. I think N5 has all the info I have been looking for. I will try loading the format into a prill program and see if the machine pecks or gives me fault.

thanks

Dan

[T0DD]

Dan-
Send me pm with an email address & I'll send you an image of pages that you want from the manual. Just specify what format (ISO or consv. or both).
Take Care,
Todd