I'm wondering if anyone might know where I can pick up an electronic copy of a manual for a Mill Machine Dynapath Delta-500-3? I don't have $210.00 to give to the manufacturer and thought there might be a copy of this old manual somewhere. I think it would be titled for a DELTA 50 and the machine has the CNC attachment on it.
I would be most appreciative if someone could possibly help me out with a manual or point me to some free learning tutorials for operating the CNC of the Dynapath Mill.
Thank you kindly
i run 2 compumills with dynapath 20 and 50 i will be willing to make some videos on youtube and show the basics. Preaty much the controls are the same on 20 and 50 some things change here and there but not much. as far as the programing i use mastercam 7, 8, 9 im not very familiar with 10 i can also do some manual programing but is preaty much just for editing but i can show you the basics of drilling milling circular interpolation and some other stuff if you want to manually program , but you also have to have some common sence to able to learn. and please serious people only. i live in houston texas so if anyone from here let me know. any particular thing you want to learn just let me know pm and i will give you my cellphone number and we can talk
If you could make a few you tube videos, that would be great. So far I've been going to college for about a year and have had CNC Programming and I'm using MasterCAM X3 now. However how that all works with the Delt 50, I'm not sure. Would be nice to program a part and just let the mill go. Any help is highly appreciated.