What linear trucks did DynaCNC use?

[macona]

We are adding a second gantry to our DynaCNC table. Anyone know what truck model they used on the linear rails? All I can see is HG25 on the plastic wiper.

[bogger44]

We are adding a second gantry to our DynaCNC table. Anyone know what truck model they used on the linear rails? All I can see is HG25 on the plastic wiper.

HIWIN linear rails HG will be the mod # and 25 the size goto HIWIN web site. You may be able to get this at your local bearing store.

[Mojito500]

I had to replace one of ours, and I found an exact replacement at McMaster-Carr -> linear rails/blocks.

Make sure you have a caliper and a bearing in hand to find the right one.