| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| DynaCNC Discuss DynaCNC cnc machines here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
07-30-2009, 07:13 PM
| |||
| | |||
hello, On start up machine showed a servo alarm 006B S , I know is a spindle alarm but don't know how to fix it. It also says ATC not initialized. Anyone knows what is this about? I would appreciate some hints, Thanks.    |
|
#2
07-30-2009, 10:18 PM
| |||
| |||
| Which control do you have? L3? 520? ATC initialization is done after performing the zero return of the X & Z axes. Turn the Mode Select switch to T, go to the TOOL/PARAM screen. Use the soft keys at the bottom to get to the PLC-SW menu. Then locate the ATC Initial parameter, enter the number at the bottom and press enter. Make sure the turret is clear because it will try to spin to tool #1. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| NEED HEELP ALARM #414 Y AXIS SERVO ALARM? | PICMAN | Fanuc | 6 | 04-29-2011 06:20 PM |
| DYNA DL3300 CNC LATHE, need help! | tac | DynaCNC | 9 | 02-26-2009 08:45 PM |
| DYNA 3000H lathe | PapaJohn | Benchtop Machines | 0 | 10-27-2008 07:01 PM |
| Problem- Servo alarm 414 Harrison ge fanuc Alpha 400 lathe | davide.castro | Fanuc | 4 | 10-20-2008 11:42 AM |
| Retrofit a Dyna 3000 Lathe | starlight | Open Source CNC Machine Designs | 0 | 05-06-2008 07:45 PM |
| | |
Linear Mode
