I have a Legacy router mill and I'm in the process of purchasing the CNC upgrade being supplied by DynaCNC. I have no prior CNC experience but I am comfortable working with programs and have some programming experience ( not with Mach 3 though). The system will be 4/5 axis; X,Y,Z, and the spindle holding the stock with motors and the bed is adjustable manually.
I have spoken with Dyna and they don't seem to have any manuals or tutorials available except the basic setup information.
Are there any books available for Mach 3? To start with I'm interested in producing long tapered shafts and I'm looking for guidance with the code. Any samples would be helpful or direction where where I can get programming info will be helpful.