WTB Dyna Myte 3000 Lathe and 2800 mill

[britcollector]

I am looking for a Dyna Myte DM3000 and a 2800 mill. Working machines or parts machines considered. Any leads appreciated.

Thanks!!

[yroy27]

I have a Dyna myte 3000 lathe. It needs work. Some one blew out the control messing with the x axis resolver. It has a very heavy table with it. I can send pictures. It has been sitting a long time so there is stains on the ways. I will take 750.00 for it where is as is. I don't think it has ever been run. The machine with table I am guessing weighs 1500 pounds. I am in Eden Utah.

[2ferrous]

Where are you located?

Timothy

[yroy27]

I am in Eden Utah. The machine with table weight i am guessing is 1500 lbs.

[Vittorio88]

I have a Dynamyte 2800 for sale.

We got it in with no history, and spent a while to get it running.
It has an onboard PC running DOS and a proprietary 4M Program. The PC was in bad shape; it wouldn't boot properly. The hard drive it came with was failing, and after cloning it to a new drive the computer booted properly.
It worked flawlessly the first times it turned on. We saw all the motors were functioning properly including the spindle. After a day or so it began to throw back error codes.

I have since been unable to give any attention to it, but I am sure it's just a silly electrical short away from being a fully functional CNC mill.

On a side note, I was hanging on to this machine because I believe it would be an excellent candidate to retrofit to LinuxCNC or a similar application.

You can get back to me at vittorio.alfieri [at] alpha-logix.com

EDIT: I am in Brownsville, Tx

[frog]

I am also looking for a DYNA Myte 2800 if anybody knows of someone that has one that is a needing a retrofit. kd4ffd@yahoo.com