DM4400M Spindle motor and drive questions

Results 1 to 2 of 2

Thread: DM4400M Spindle motor and drive questions

  1. #1
    Member
    Join Date
    Dec 2009
    Location
    USA
    Posts
    521
    Downloads
    0
    Uploads
    0

    Default DM4400M Spindle motor and drive questions

    First, I have a DM4400. It has the Servo Dynamics SD303 amp and the SEM DC Brush spindle motor. I have both running fine under Flashcut CNC and a small board I made.
    I'm pondering replacing both with the Mitsubishi motor and drive similar to the later model DM4400M which had the Mitsubishi Meldas M3 control.

    What I am hoping for is someone with a DM440M that can take a picture of:
    The spindle motor label
    The spindle motor drive label
    If feasible the mount on the head of the DM4400 that the motor bolts to.

    Post here for others if possible.

    Thanks in advance.

    Marty
    Mesa, AZ

    Similar Threads:


  2. #2
    azpenngirl's Avatar
    Join Date
    Oct 2015
    Location
    Tucson
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default

    Hey Marty,
    We have a DM4500 with the Mitsubishi Control on it still, not sure if this will help you or not. Let me know



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

DM4400M Spindle motor and drive questions

DM4400M Spindle motor and drive questions