Now that I have posted this, hopefully it will be of benefit to others in the future.
A question to those who understand how to write a tool change macro.
Being that the DM3000 has a bidirectional tool changer. How would one write a macro that if a tool was closer CCW? The macro would need to power a relay that releases the pawl and turns the tool turret CCW. Then depowers the relay upon reaching the correct tool and backs up against the pawl.
Everyone I have ever seen with a DM3000 has their tool changer set up the way of this macro. Yet the changer itself is capable of bidirectional travel IF the electromagnetic pawl is lifted via 12v. I do have the power supply in the cabinet that can be used and a relay, the extra pins etc.
In case you are not familiar with the mechanism itself, here is picture of MRM's tool changer as it is disassembled. Clearly there is a pawl and electromagnetic switch, I have verified it does work. http://www.cnczone.com/forums/dyna-m...ml#post1120441, see post #22.