- How to fill the oil reservoir on DM4400 push-bar?
-
Registered
How to fill the oil reservoir on DM4400 push-bar?
Hi: My DM4400 has a air-over-oil pressure amplifier that I have filled and it works fine to operate the push-bar and release the tools. The push-bar itself operates within a block that measures 4" x 4" x 2.1/2", and above that is a 2 x 2 x 2 block with a sight-glass that looks empty. How do I put oil in that upper block? There is a circular thing, about 1.3/4" diameter x 1/2" tall above the 2 x 2 x 2, and the circular thing is right under the spindle motor connector box. Am I supposed to get that out of there to put oil in? Or pump it in from somewhere else and open a bleed port, Or? thanks, Pete
Similar Threads:
-
- How to fill the oil reservoir on DM4400 push-bar?
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules