Machined parts

[Dolphin USA]

If anyone has any parts machined within Dolphin that would like to have them shown on our site, please send them to support@dolphincadcamusa.com or PM us. We have a few ideas for the homepage that we would like to work out. Thank you.

[jerrelmm]

I will machine you a part just to see if Dolphin will really work. I have Mastercam for the mill but it want do lathe so I bought Dolphin for the lathe and havent got past the cad part yet. If you will send me a print and a file I will give it a try. I tried to print the manuals but could not open them because it said they were invalid or corrupted. jerrelmm@aol.com

[Dolphin USA]

Jerrell, the manuals should not be corrupted. We have our new site up and running, perhaps you could try the download again. Also, if you open the CAM software, there are several example files already there. Let us know if we can be any help.

[windy_miller]

The 'help' manuals are still for version 8 rather than the latest version 10. Still quite useful to read through. They are mainly the help screens found within the PM software rather than an actual manual. Those that have never used or understand the theory of Cad or Cam will struggle. Watching all the video tutorials is the best way to get started and well worth the effort. Thanks for making them Dolphin.

Wind_miller
& soon to be windy_turner as well )