milling lip around bottom of item

[BrassBuilder]

Originally Posted by metalworkz Hi Mike, Wow, it looks very good! It would be kool to see the whole project when you get it done too. Glad to be able to help in any way. Keep us posted on your progress. Regards,

Thanks. I think it came out pretty decent considering I just started using the program not much over a week ago. I'll get more parts posted as I get some more of this made.

I had to redraw the part after making the first piece. I had to move the whole front edge back about 1/16" and the two columns up front had to move back about 1/32" or so. There was a flat spot on the very front of them being milled when the flange contour got milled. I just had to back them up a little and get them away from the front edge of the flange. I'm running another one tonite and see what happens. I still need to do a drilling contour for the bolt holes, but that is easy enough to do (been there, done that already).

And the adventure continues....
Mike