Well it's confirmed, I am a moron.
I found a little arrow tab that brought up the main menu on the right hand side. Yes, the grey one with the Setup, DXF, etc. on it. Found the Pocket custom and there we go.
I am cutting the part now, but in my haste put the wrong cutter in. I used an 1/8" for the CAM and put a 3/8 in the Mill. Opps, not much of a pattern.
Still having some issues with setting up the starting point. I also ran off the piece and am cutting air.
This thing should be taken away from me, before I cause any real harm.