| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Dolphin CADCAM Discuss Dolphin CAD/CAM software here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#2
 
02-16-2011, 08:48 PM
| ||||
| ||||
| You should contact the local Dolphin CAD/CAM office. They should have the EMC2 compatible post for you. It's quite common.
__________________ Dolphin CAD/CAM Support Download a free trial at http://www.dolphincadcamusa.com  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Can EMC2 control lathe spindle with Step/Direction Drive? | Mike Nash | LinuxCNC (formerly EMC2) | 9 | 03-16-2010 04:18 PM |
| EMC2 Lathe and Mcam9 ?? | Concealed45 | LinuxCNC (formerly EMC2) | 4 | 12-26-2009 11:50 PM |
| Need Help!- MC9 with EMC2 lathe PP tool setup | Concealed45 | Post Processors for MC | 2 | 12-22-2009 05:35 PM |
| EMC2 and lathe retrofitting. | GuntisK | LinuxCNC (formerly EMC2) | 14 | 03-30-2008 03:08 PM |
| Lathe Gui for Emc2 | R.thayer | LinuxCNC (formerly EMC2) | 2 | 11-28-2006 01:33 PM |
| | |
Linear Mode
