- DMB4250-8B connected to Super PID with Mach3
-
Registered
DMB4250-8B connected to Super PID with Mach3
Hello gentlemen,
I have hook-up a Super PID to my DMB4250-8B brakeout board. I can get it to run manually, but not with MDI using Mach3. My solder jumper is set to PC. I have wired it up the same as if connecting to VFD. Yes I am a newbee to wiring, and the whole machine building. Does anyone have an idea? Any help would be greatly appreciated.
Thanks in advance.
Nytwin1
Similar Threads:
-
-
Registered
Re: DMB4250-8B connected to Super PID with Mach3
Was it something I said? Is there not enough info to start a conversation? I posted this almost a year ago, and I still have'nt gotten any where. Could someone please throw me a bone.
-
Registered
- DMB4250-8B connected to Super PID with Mach3
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules