LinkBack URL
About LinkBacks
You should be able to stop it with settings in the VFD. I can't tell you how, but I know our 10HP HSD's stop very quickly. To stop really fast, you may need to add a braking resistor.
| | |
Does anyone have a suggestion for how to stop an HSD spindle in a few seconds?
You should be able to stop it with settings in the VFD. I can't tell you how, but I know our 10HP HSD's stop very quickly. To stop really fast, you may need to add a braking resistor.
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Typically you would change the decceleration time parameter in your vfd. If the back EMF it generates is too large, you'll need a braking resistor to dissipate the extra power. The specifics of how to do both those things depend on the type of vfd you have.
Posting Permissions
| | |
