Could someone post there setting for a HY02D223B

**Ed Williams** · 05-19-2009, 12:12 PM

On my readout it says 11,520 is my max rpm when it is running at 400hz. I must have something set wrong on my 2.2kv spindle.
Thanks

**yngndrw** · 05-19-2009, 10:01 PM

Do you have it set as 2 poles ?

**Ed Williams** · 05-19-2009, 10:19 PM

No I have it set for 4 poles.

**yngndrw** · 05-20-2009, 08:34 AM

Then setting it as 2 poles should fix it. It looks like it would only read up to 23,040RPM though so I don't know where the other 1,000RPM has gone.

**Ed Williams** · 05-20-2009, 11:43 AM

What is pd144 suppose to be set at.
Thanks

**yngndrw** · 05-20-2009, 11:45 AM

I'd think it's 3,000 as it's the speed at 50Hz.

(As 400Hz is 24,000RPM.)

**Ed Williams** · 05-20-2009, 01:23 PM

That was it.
Thanks Alot

Thread: Could someone post there setting for a HY02D223B