PCB Makers

[arizonavideo]

Many people make PCB with their router tables and I am building a machine to do just that but I'm still learning everything bit by bit.

My DIY router table is about half done but it will take some time to get all the bugs worked out and to find the best software for the jobs needed.


I have a need for a small amount around 20 to 40 vary small PCP boards of about 1" x 3" for a final driver. The parts count is about 10 total with less than 20 hole. It is the simplest board you have ever seen just three NF55 transistors and some spade connectors.

If you can help me please send me an PM.

I can provide the PCB if needed.

Thanks
Dave

[Hirudin]

If you haven't already you might want to put up a post over here too...
http://www.cnczone.com/forums/employment_opportunity/

Heh, didn't notice your name...
...or your machine (the color sorta makes it look like it's made from MDF)