One Newton is about 0.24lbs and 1 meter is 39.37inches.
how to conver these units?
1.2Nm to oz-in
One Newton is about 0.24lbs and 1 meter is 39.37inches.
An open mind is a virtue...so long as all the common sense has not leaked out.
so what that in oz-in, im lost in the math?
Hi:
1Nm=141.612 oz-inch
1.2Nm= 169.93 oz-inch
regards
Here's a link to a neat little conversion calculator:
http://www.magtrol.com/support/torque_calc.htm
I usually try to memorize stuff like this, but the older I get, the lazier I get...
Download Convert. It's awesome.
http://joshmadison.com/software/convert/
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
awesome
Just realised, it's the same as Gerry's