LinkBack URL
About LinkBacks
and another, this is our first CNC router and it runs at 46" oer minute, we do use 6mm lead screws but its great, and 4" Zaxis as we use it to route fuselage halves for molding takes about 1.5 to 2 hours to route one half of a fuse.
MJblack
hi all, just thought you might like to have a look at our home made cnc gear,
all MDF and ally
best regards,
micheal j black
Fat Birds Dont Fly
and another, this is our first CNC router and it runs at 46" oer minute, we do use 6mm lead screws but its great, and 4" Zaxis as we use it to route fuselage halves for molding takes about 1.5 to 2 hours to route one half of a fuse.
MJblack
Fat Birds Dont Fly
And another, we have changed the Z axis now fro maximum movement, we were surprised how accurate it truely is!
MJblack.
www.rcelectricflight.com
Fat Birds Dont Fly
Nice!
Is that a "hot wire cutter" device in the middle of your first pic? Or am I just imagining ....
I'd like to see and read more of this aspect of your shop!
Last edited by Bloy2004; 01-25-2004 at 10:18 PM.
Shoptask rebuild:
http://www.cnczone.com/forums/showthread.php?t=2139
Home built gantry router:
http://www.cnczone.com/forums/showthread.php?t=5049
yeah we make model aircraft kits and cannot live with out it now....we used to do it by hand but..eeeuughh..just isnt repeatable enough for me...or at least im not patient enough! lol
go have a look at our kits and stuff at www.rcelectricflight.com
best regards, mike
Fat Birds Dont Fly
Sam
Are you giving up on your big machine ??
Persistance and patience are the key to CNC
Posting Permissions
| | |
