I am going to build Joe's great router (my first build) and while I wait for the kit from Joe, I have started collecting components that I will need and studying the solidworks drawings.
I have been looking at the solidworks drawing files for the bearing brackets and they do not appear to have all the information required to drill the holes for the bearings as they only show the distance from the ends for the holes and not from the edge, am I missing something? I assume the the bearing holes are 5/16" and the attachment holes for the bearing block are 1/4".
First of many questions I am sure
Last edited by David Da Costa; 10-27-2006 at 01:42 PM.