Sanyo- Denki Step Syn motors need some help on driver for
I have a couple of Sanyo- Denki Step Syn motors and need some help on finding a driver for them. What can i use...I have the specs on the motor:
CAT String 103H7522-7051(7021) 0.735(104.1) N-M/oz-in they are 5 phase motors .72 degree step
The reason I am interested in these is that I already have them and they are mounted on a small x/y table already and this will be my introduction into the cnc world. I will use this for a demo to get use to the software (I have yet to buy)..
any help would be great. I will answer any addition questions that I am able to.
BTW if you can't tell i am a newbie (very much so) i have been lurking but have yet to start anything. I have plenty of space and lots of tolls to do the project...Time is a little tight but .... that will come.
thanks in advance....You guys do some great things in this forum...