Ultimate Tech Problem Solved!

[shootingarts]

I had been planning my first CNC machine, a homemade router, back in the summer. A very unladylike female named Katrina paid a visit and all of my building plans were dashed due to a major technical problem.

I have now solved that ultimate tech problem. I have an adequate supply of rectangles of paper being roughly 2.5x6 and color coded green on one side and gray on the other to provide adequate lubrication for the project to flow smoothly. Now I have to reread and relearn what little I had started to absorb before this project got derailed for a few months!

Hu

[txcowdog]

Yea, a few Benjamins always grease the skids.