Scripter Compile Error. in:M3. M1s

[Dan911]

Hoping some1 could explain why I'm receiving this error in Mach 3. It happens when running G code and get to the "M3 S24000" line. Spindle don't turn on and I get that error.

Thanks,
Dan

[Walky]

Hoping some1 could explain why I'm receiving this error in Mach 3. It happens when running G code and get to the "M3 24000" line. Spindle don't turn on and I get that error.

Thanks,
Dan

My gcode knowledge is very limited so I might just be talking nonsense, but shouldn't that be "M3 S24000"?

[Dan911]

Thanks Walky, but I made and error on post unfortunately the code was correct, I just edited it.

Thanks again,
Dan

[ger21]

Open M3.m1s and see what's in it?

But, first, try closing Mach3, and rebooting Windows and see if it fixes the problem.

[Dan911]

The reboot fixed it, thanks Ger.

Dan