Is anyone familiar with this TB6560 board? The one I purchased did not come with any of the cables and I need to know what kind of connector is being used here to connect the stepper motors. The DB9 and DB25 I have plenty of, but I am not familiar with the connectors that are being used to connect the steppers.
Thanks for any help. I am hoping this is something I can buy at Radio Shack. I have been working on this 10x9 build for a couple of months and it would be nice to at least get it to surface the table this weekend lol.
The ones circled look like quick disconnect screw terminals, most of the terminal manufactures make them, Phoenix Contact, Weidmuller etc.
You should be able to get them from DigiKey or Newark.
Accurately measure the spacing first as many popular ones are 5.08mm.
Al.
CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Posting Permissions
LinkBack URL
About LinkBacks
