Superior Electric SLO-SYN CNC

[Rick Hardy]

I am a new member to CNCzone (User Name: Rick Hardy) and wanted to know which Forums to post the following questions to:

I have acquired the following and would like help making a CNC machine. (does not matter if it is a metal, wood or other material working machine, router, mill or lathe):

(4) Superior Electric SLO-SYN Model SS2000I-V Programmable Motion Controllers

(3) Superior Electric SLO-SYN Motor Drives Model SS2000D6

(4) Superior Electric M092-FF-402 Stepper Motors

I also have a disk with the SLO-SYN 2000 Series Program Development Software as well as documentation for Installation Instructions, Programming, G-Codes, etc.

Thanks,
Rick Hardy

[ger21]

Next time, just ask once. We'll move it to the correct place if we need to.

Now, you didn't actually ask any questions. Fire away.

[Dfriis]

Rick, I have a ss20001 and really could use a copy of the disk you have. I have tried to find it everyplace. I called warner electric and they said it was no longer supported. I can give you an email address that you could send it to Don@uniteduec.com I like you just want to experiment with it. Your help would be great.

Thanks, Don

[plfluke]

Don, did you received a copy of the MS2000 software from Rick? If so would you be so kind to share it with me? My email address is flukep@jostens.com

Paul

[aloho]

Originally Posted by Rick Hardy I am a new member to CNCzone (User Name: Rick Hardy) and wanted to know which Forums to post the following questions to: I have acquired the following and would like help making a CNC machine. (does not matter if it is a metal, wood or other material working machine, router, mill or lathe): (4) Superior Electric SLO-SYN Model SS2000I-V Programmable Motion Controllers (3) Superior Electric SLO-SYN Motor Drives Model SS2000D6 (4) Superior Electric M092-FF-402 Stepper Motors I also have a disk with the SLO-SYN 2000 Series Program Development Software as well as documentation for Installation Instructions, Programming, G-Codes, etc. Thanks, Rick Hardy

Dear rick,Im new member CNC zone,would you like give me SLO-SYN 2000 Series Program Software as well as documentation for Installation Instructions, Programming, G-Codes, etc. ? ? pleasae email me by private email alamputra_tobasa@yahoo.com thx