Using coolant on aluminum - CNCzone.com-The Largest Machinist Community on the net!

12-05-2009, 11:43 AM

Ed Williams Ed Williams is offline

Join Date: Feb 2006

Location: US

Posts: 167

Using coolant on aluminum

permalink

I'm using a 2.2kv spindle. I can cut aluminum at 30 to 40 ipm and .02 depths with 1/8" bit. What would I be able to achieve if I use coolant and what would be type of coolant setup.
Thanks Ed

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is On Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Newbie to CNC aluminum milling feed/speed/depth/coolant, etc.	mrk	General Material Machining Solutions	4	03-30-2009 01:51 PM
Aluminum Without Coolant	DeusExMachina	General Metalwork Discussion	5	02-27-2009 10:01 AM
Coolant stains on aluminum	JpBinc	General Metalwork Discussion	14	11-19-2008 10:11 AM
Coolant for milling aluminum	rchunter94	General Metalwork Discussion	1	03-03-2008 03:04 PM
Coolant or No Coolant when turning....	Crashmaster	General Metalwork Discussion	3	05-20-2007 01:20 AM

All times are GMT -5. The time now is 01:09 AM.