| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| DIY-CNC Router Table Machines Discuss the building of home-made CNC Router tables here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
11-16-2009, 01:58 PM
| |||
| |||
I currently have access to a full machine shop with most machining tools at my disposal. I've seen just the rails of the linear guides run for $4+ an inch  and was wondering what sort of tolerances those hold. Would it be possible to just purchase the bearing blocks and machine my own rails? Has anyone ever attempted such a thing?  |
|
#2
11-16-2009, 02:12 PM
| ||||
| ||||
|
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Newbie- linear rods versus linear rails | haylspa | Benchtop Machines | 4 | 08-11-2009 08:44 PM |
| How to machine ends of linear guide rails. | SES1 | Linear and Rotary Motion | 0 | 02-12-2008 02:27 PM |
| linear rails | lgalla | Linear and Rotary Motion | 5 | 02-08-2008 04:35 PM |
| vxb linear rails | alexis221 | DIY-CNC Router Table Machines | 9 | 03-12-2007 10:49 PM |
| Linear bearing spacing & Sizing linear rails? | fyffe555 | DIY-CNC Router Table Machines | 3 | 12-07-2004 01:09 PM |
| | |
Linear Mode
